Pioneer Pro Anchoring Epoxy
Formulated for use with reinforcement bars
Description:
​
A two-component high-strength structural adhesive, dispensed via an ordinary cailking gun. It is designed for bonding threaded rod and reinforcing dowelling bars into drilled holes, in solid concrete materials.
​
Packaging
​​240ml cartridge​
​
​​Applications: Anchoring threaded rod and rebar to concrete and masonry
WATCH: How to use Pioneer Pro Anchoring Epoxy
Directions for use
-
Use recommended heavy duty professional caulking gun.
-
Remove plastic plug from cartridge. Save this for closing of cartridge if needed.
-
Attach mixing nozzle to the cartridge.
-
On an separate dish or container, gun a small amount of epoxy until a uniform color is achieved. Note: Use only within the specied potlife period. Mixing nozzle will harden if unused after this period. Discard and replace if necessary.
-
Dispense the epoxy at the bottom of the hole while withdrawing the nozzle. Fill only about 5/8 of the hole so that once the threaded rod or bar is inserted, the hole becomes completely led up.
-
Insert threaded rod or rebar at the bottom of the hole while turning clockwise.
-
Remove excess material.
-
Leave anchor undisturbed for 4 hours, or longer for lower temperatures.
Need more info?
Contact us
Landline: +632-8721-5781 to 87
Website: www.pioneer-adhesives.com
Facebook: fb.com/PioneerAdhesivesPH
YouTube: PioneerAdhesivesPH
TikTok: pioneeradhesives
Instagram: pioneeradhesivesph